dmesg - OCZ TRION100

Return To OCZ TRION100 System Information

random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0
Linux version 4.13.0-041300-generic (kernel@gloin) (gcc version 7.2.0 (Ubuntu 7.2.0-2ubuntu1)) #201709031731 SMP Sun Sep 3 21:33:09 UTC 2017
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b804efff] usable
BIOS-e820: [mem 0x00000000b804f000-0x00000000b8083fff] ACPI data
BIOS-e820: [mem 0x00000000b8084000-0x00000000b8425fff] usable
BIOS-e820: [mem 0x00000000b8426000-0x00000000b8426fff] ACPI NVS
BIOS-e820: [mem 0x00000000b8427000-0x00000000b8427fff] reserved
BIOS-e820: [mem 0x00000000b8428000-0x00000000c50a0fff] usable
BIOS-e820: [mem 0x00000000c50a1000-0x00000000c67a7fff] reserved
BIOS-e820: [mem 0x00000000c67a8000-0x00000000c67cefff] ACPI data
BIOS-e820: [mem 0x00000000c67cf000-0x00000000c6989fff] usable
BIOS-e820: [mem 0x00000000c698a000-0x00000000c6fb1fff] ACPI NVS
BIOS-e820: [mem 0x00000000c6fb2000-0x00000000c7a8dfff] reserved
BIOS-e820: [mem 0x00000000c7a8e000-0x00000000c7afefff] type 20
BIOS-e820: [mem 0x00000000c7aff000-0x00000000c7afffff] usable
BIOS-e820: [mem 0x00000000c7b00000-0x00000000c7ffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000436ffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.50 by American Megatrends
efi:  ACPI 2.0=0xb804f000  ACPI=0xb804f000  SMBIOS=0xc7a00000  SMBIOS 3.0=0xc79ff000  MPS=0xfc9e0  ESRT=0xc37f0018 
random: fast init done
SMBIOS 3.0.0 present.
DMI: System manufacturer System Product Name/PRIME B250M-A, BIOS 0313 10/19/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x437000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00E0000000 mask 7FE0000000 uncachable
  1 base 00D0000000 mask 7FF0000000 uncachable
  2 base 00C8000000 mask 7FF8000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0xc7b00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc40-0x000fcc4f] mapped at [ffff9d44400fcc40]
esrt: Reserving ESRT space from 0x00000000c37f0018 to 0x00000000c37f0050.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9d4440095000] 95000 size 24576
Using GB pages for direct mapping
BRK [0x41e723000, 0x41e723fff] PGTABLE
BRK [0x41e724000, 0x41e724fff] PGTABLE
BRK [0x41e725000, 0x41e725fff] PGTABLE
BRK [0x41e726000, 0x41e726fff] PGTABLE
BRK [0x41e727000, 0x41e727fff] PGTABLE
BRK [0x41e728000, 0x41e728fff] PGTABLE
BRK [0x41e729000, 0x41e729fff] PGTABLE
BRK [0x41e72a000, 0x41e72afff] PGTABLE
BRK [0x41e72b000, 0x41e72bfff] PGTABLE
BRK [0x41e72c000, 0x41e72cfff] PGTABLE
BRK [0x41e72d000, 0x41e72dfff] PGTABLE
BRK [0x41e72e000, 0x41e72efff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x3141c000-0x34a05fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000B804F000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000B804F0A8 0000CC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000B8078018 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000B804F210 028E08 (v02 ALASKA A M I    01072009 INTL 20160422)
ACPI: FACS 0x00000000C6FB1C40 000040
ACPI: APIC 0x00000000B8078130 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000B80781B8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: BGRT 0x00000000B8083A48 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000B8078258 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: SSDT 0x00000000B8078298 000390 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x00000000B8078628 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000B80786C8 003154 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
ACPI: SSDT 0x00000000B807B820 002544 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
ACPI: HPET 0x00000000B807DD68 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
ACPI: SSDT 0x00000000B807DDA0 000024 (v02 INTEL  OEM_RTD3 00001000 INTL 20160422)
ACPI: SSDT 0x00000000B807DDC8 000E3B (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x00000000B807EC08 000B1B (v02 INTEL  xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x00000000B807F728 000042 (v01 INTEL  EDK2     00000002      01000013)
ACPI: SSDT 0x00000000B807F770 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
ACPI: LPIT 0x00000000B8080650 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
ACPI: WSMT 0x00000000B80806E8 000028 (v01 INTEL  KBL      00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000B8080710 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x00000000B80809B0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x00000000B80839B8 000034 (v01 INTEL           00000002 MSFT 0000005F)
ACPI: DBG2 0x00000000B80839F0 000054 (v00 INTEL           00000002 MSFT 0000005F)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000436ffffff]
NODE_DATA(0) allocated [mem 0x436fd4000-0x436ffefff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x0000000436ffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000057fff]
  node   0: [mem 0x0000000000059000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000b804efff]
  node   0: [mem 0x00000000b8084000-0x00000000b8425fff]
  node   0: [mem 0x00000000b8428000-0x00000000c50a0fff]
  node   0: [mem 0x00000000c67cf000-0x00000000c6989fff]
  node   0: [mem 0x00000000c7aff000-0x00000000c7afffff]
  node   0: [mem 0x0000000100000000-0x0000000436ffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000436ffffff]
On node 0 totalpages: 4178371
  DMA zone: 64 pages used for memmap
  DMA zone: 27 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 12553 pages used for memmap
  DMA32 zone: 803366 pages, LIFO batch:31
  Normal zone: 52672 pages used for memmap
  Normal zone: 3371008 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
[Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x52 (or later)
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0xb804f000-0xb8083fff]
PM: Registered nosave memory: [mem 0xb8426000-0xb8426fff]
PM: Registered nosave memory: [mem 0xb8427000-0xb8427fff]
PM: Registered nosave memory: [mem 0xc50a1000-0xc67a7fff]
PM: Registered nosave memory: [mem 0xc67a8000-0xc67cefff]
PM: Registered nosave memory: [mem 0xc698a000-0xc6fb1fff]
PM: Registered nosave memory: [mem 0xc6fb2000-0xc7a8dfff]
PM: Registered nosave memory: [mem 0xc7a8e000-0xc7afefff]
PM: Registered nosave memory: [mem 0xc7b00000-0xc7ffffff]
PM: Registered nosave memory: [mem 0xc8000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc8000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff9d4876c00000 s119704 r8192 d31848 u524288
pcpu-alloc: s119704 r8192 d31848 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4113055
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16096668K/16713484K available (9246K kernel code, 2477K rwdata, 4048K rodata, 2320K init, 2388K bss, 616816K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 37581 entries in 147 pages
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
	Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 3400.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6816.00 BogoMIPS (lpj=13632000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 10 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 1
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      8
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             00000007000000ff
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27260.73 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xb8426000-0xb8426fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xc698a000-0xc6fb1fff] (6455296 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time:  3:07:23, date: 02/07/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 36 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D4864060800 000717 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D48642CF400 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D4864061800 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D48642EE800 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc8000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7210000-0xf721ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf722d000-0xf722dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xf7228000-0xf7229fff]
pci 0000:00:17.0: reg 0x14: [mem 0xf722c000-0xf722c0ff]
pci 0000:00:17.0: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xf722b000-0xf722b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a294] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:a297] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a2c8] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xf7224000-0xf7227fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xf7220000-0xf7223fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xf7200000-0xf720ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xf722a000-0xf722a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7104000-0xf7104fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf7100000-0xf7103fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 03]
pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
acpiphp: Slot [1-1] registered
pci 0000:00:1d.0: PCI bridge to [bus 04]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 7F
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xb804f000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb8426000-0xbbffffff]
e820: reserve RAM buffer [mem 0xc50a1000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc698a000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc7b00000-0xc7ffffff]
e820: reserve RAM buffer [mem 0x437000000-0x437ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io  0x0290-0x029f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:03: [io  0x0680-0x069f] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0x1800-0x18fe] has been reserved
system 00:03: [io  0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io  0x0800-0x087f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fe0000-0xf7ffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io  0xfe00-0xfefe] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc8000000-0xc81fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc8200000-0xc83fffff 64bit pref]
pci 0000:00:1d.0: BAR 14: assigned [mem 0xc8400000-0xc85fffff]
pci 0000:00:1d.0: BAR 15: assigned [mem 0xc8600000-0xc87fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1d.0: BAR 13: assigned [io  0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xc8000000-0xc81fffff]
pci 0000:00:1c.0:   bridge window [mem 0xc8200000-0xc83fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 03]
pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1d.0:   bridge window [mem 0xc8400000-0xc85fffff]
pci 0000:00:1d.0:   bridge window [mem 0xc8600000-0xc87fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc8000000-0xf7ffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xc8000000-0xc81fffff]
pci_bus 0000:02: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xc8400000-0xc85fffff]
pci_bus 0000:04: resource 2 [mem 0xc8600000-0xc87fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 55208K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb404f000-0xb804f000] (64MB) mapped at [ffff9d44f404f000-ffff9d44f804efff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd3cd494, max_idle_ns: 440795223879 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1517972843.988:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-041300-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-041300-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906e9, pf=0x2, revision=0x42
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1188387323, 0)->(1293728825, -105341502)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 2977791a6bc138cb597bcddff841bb4e6c0cdbe0'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
  Magic number: 6:878:107
rtc_cmos 00:05: setting system clock to 2018-02-07 03:07:24 UTC (1517972844)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2320K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 980K
Freeing unused kernel memory: 48K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
hidraw: raw HID events driver (C) Jiri Kosina
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:17.0: version 3.0
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 244
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0xffffbd36c0035000, 38:d5:47:7e:81:32, XID 14100800 IRQ 122
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  387.26  Thu Nov  2 21:20:16 PDT 2017 (using threaded interrupts)
r8169 0000:03:00.0 enp3s0: renamed from eth0
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  387.26  Thu Nov  2 20:22:07 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b100 irq 121
ata2: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b180 irq 121
ata3: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b200 irq 121
ata4: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b280 irq 121
ata5: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b300 irq 121
ata6: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b380 irq 121
usb 1-5: new low-speed USB device number 2 using xhci_hcd
usb 1-5: New USB device found, idVendor=046d, idProduct=c31c
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB Keyboard
usb 1-5: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C31C.0001/input/input6
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5.00: ATA-9: OCZ-TRION100, SAFM11.2, max UDMA/133
ata5.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-9: OCZ-TRION100, SAFM11.2, max UDMA/133
ata4.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      OCZ-TRION100     11.2 PQ: 0 ANSI: 5
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-5/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C31C.0002/input/input7
sd 3:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:0: Direct-Access     ATA      OCZ-TRION100     11.2 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 >
sd 3:0:0:0: [sda] Attached SCSI disk
usb 1-6: new low-speed USB device number 3 using xhci_hcd
sd 4:0:0:0: Attached scsi generic sg1 type 0
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-5/input1
sd 4:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 4:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
usb 1-6: New USB device found, idVendor=046d, idProduct=c077
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6: Product: USB Optical Mouse
usb 1-6: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0003/input/input8
hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
usb 1-9: new high-speed USB device number 4 using xhci_hcd
clocksource: Switched to clocksource tsc
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Configuration file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: basic.target: Found ordering cycle on basic.target/start
systemd[1]: basic.target: Found dependency on sockets.target/start
systemd[1]: basic.target: Found dependency on sysinit.target/start
systemd[1]: basic.target: Found dependency on nbd-client.service/start
systemd[1]: basic.target: Found dependency on network-online.target/start
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
usb 1-9: New USB device found, idVendor=05e3, idProduct=0745
usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
usb 1-9: Product: USB Storage
usb 1-9: SerialNumber: 000000000903
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:01: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
systemd-journald[242]: Received request to flush runtime journal from PID 1
lp0: using parport0 (interrupt-driven).
usb-storage 1-9:1.0: USB Mass Storage device detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
scsi host6: usb-storage 1-9:1.0
usbcore: registered new interface driver usb-storage
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
usbcore: registered new interface driver uas
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 241
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input14
asus_wmi: Number of fans: 1
Adding 16712700k swap on /dev/sdb3.  Priority:-1 extents:1 across:16712700k SSFS
audit: type=1400 audit(1517972846.323:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=795 comm="apparmor_parser"
audit: type=1400 audit(1517972846.327:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=797 comm="apparmor_parser"
audit: type=1400 audit(1517972846.327:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=797 comm="apparmor_parser"
audit: type=1400 audit(1517972846.327:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=797 comm="apparmor_parser"
audit: type=1400 audit(1517972846.327:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=797 comm="apparmor_parser"
audit: type=1400 audit(1517972846.328:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=796 comm="apparmor_parser"
audit: type=1400 audit(1517972846.328:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=796 comm="apparmor_parser"
audit: type=1400 audit(1517972846.328:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=802 comm="apparmor_parser"
audit: type=1400 audit(1517972846.329:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=801 comm="apparmor_parser"
random: crng init done
NVRM: Your system is not currently configured to drive a VGA console
               on the primary VGA device. The NVIDIA Linux graphics driver
               requires the use of a text-mode VGA console. Use of other console
               drivers including, but not limited to, vesafb, may result in
               corruption and stability problems, and is not supported.
new mount options do not match the existing superblock, will be ignored
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
nvidia-modeset: Allocated GPU:0 (GPU-432f272b-e0e9-611a-1acb-e3acbdd15087) @ PCI:0000:01:00.0
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3408000147 Hz
vboxdrv: Successfully loaded version 5.0.40_Ubuntu (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
Bridge firewalling registered
Initializing XFRM netlink socket
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): br-4f4e220dfb4f: link is not ready
IPv6: ADDRCONF(NETDEV_UP): docker_gwbridge: link is not ready
IPv6: ADDRCONF(NETDEV_UP): br-b89ca13d44f9: link is not ready
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): br-029c851d8c37: link is not ready
IPv6: ADDRCONF(NETDEV_UP): br-1a95f4608848: link is not ready
IPv6: ADDRCONF(NETDEV_UP): br-4ad6840c92b2: link is not ready
br0: renamed from ov-001000-oqhna
vxlan0: renamed from vx-001000-oqhna
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered disabled state
device vxlan0 entered promiscuous mode
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered forwarding state
veth0: renamed from vethd10d376
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered disabled state
device veth0 entered promiscuous mode
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered forwarding state
eth0: renamed from veth5fac834
docker_gwbridge: port 1(veth4e7a751) entered blocking state
docker_gwbridge: port 1(veth4e7a751) entered disabled state
device veth4e7a751 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth4e7a751: link is not ready
docker_gwbridge: port 1(veth4e7a751) entered blocking state
docker_gwbridge: port 1(veth4e7a751) entered forwarding state
docker_gwbridge: port 1(veth4e7a751) entered disabled state
eth1: renamed from veth0ba924e
IPv6: ADDRCONF(NETDEV_CHANGE): veth4e7a751: link becomes ready
docker_gwbridge: port 1(veth4e7a751) entered blocking state
docker_gwbridge: port 1(veth4e7a751) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker_gwbridge: link becomes ready
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:ModuleInitialise:109:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:Open:49:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: vm_pgoff:  1
KernelInterface: vm_start:  7faefffd9000
KernelInterface: vm_end:  7fb336fd8000
KernelInterface: length:  436fff000
x86/PAT: ControllerCudaT:5535 map pfn RAM range req write-back for [mem 0x00001000-0x436ffffff], got uncached-minus
blk-mq: reduced tag depth to 10240
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
NBLOCK_MAX_SEGMENTS: 256
x86/PAT: ControllerCudaT:5535 map pfn RAM range req write-back for [mem 0x00000000-0x7fffffffff], got uncached-minus
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:Release:55:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:ModuleExit:115:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:ModuleInitialise:109:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:Open:49:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: vm_pgoff:  1
KernelInterface: vm_start:  7fc93176f000
KernelInterface: vm_end:  7fcd6876e000
KernelInterface: length:  436fff000
x86/PAT: ControllerCudaT:7342 map pfn RAM range req write-back for [mem 0x00001000-0x436ffffff], got uncached-minus
blk-mq: reduced tag depth to 10240
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
NBLOCK_MAX_SEGMENTS: 256
x86/PAT: ControllerCudaT:7342 map pfn RAM range req write-back for [mem 0x00000000-0x7fffffffff], got uncached-minus
bash (5723): drop_caches: 3
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:Release:55:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:ModuleExit:115:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:ModuleInitialise:109:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:Open:49:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: vm_pgoff:  1
KernelInterface: vm_start:  7fa8f316e000
KernelInterface: vm_end:  7fad2a16d000
KernelInterface: length:  436fff000
x86/PAT: ControllerCudaT:9603 map pfn RAM range req write-back for [mem 0x00001000-0x436ffffff], got uncached-minus
blk-mq: reduced tag depth to 10240
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
NBLOCK_MAX_SEGMENTS: 256
x86/PAT: ControllerCudaT:9603 map pfn RAM range req write-back for [mem 0x00000000-0x7fffffffff], got uncached-minus
bash (5723): drop_caches: 3
bash (5723): drop_caches: 3
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:Release:55:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:ModuleExit:115:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:ModuleInitialise:109:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:Open:49:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: vm_pgoff:  1
KernelInterface: vm_start:  7fb9cf6dc000
KernelInterface: vm_end:  7fbe066db000
KernelInterface: length:  436fff000
x86/PAT: ControllerCudaT:10782 map pfn RAM range req write-back for [mem 0x00001000-0x436ffffff], got uncached-minus
blk-mq: reduced tag depth to 10240
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
NBLOCK_MAX_SEGMENTS: 256
x86/PAT: ControllerCudaT:10782 map pfn RAM range req write-back for [mem 0x00000000-0x7fffffffff], got uncached-minus
bash (5723): drop_caches: 3
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:Release:55:
EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
print_req_error: I/O error, dev loop0, sector 2
EXT4-fs (loop0): unable to read superblock
print_req_error: I/O error, dev loop0, sector 2
EXT4-fs (loop0): unable to read superblock
print_req_error: I/O error, dev loop0, sector 2
EXT4-fs (loop0): unable to read superblock
print_req_error: I/O error, dev loop0, sector 0
SQUASHFS error: squashfs_read_data failed to read block 0x0
squashfs: SQUASHFS error: unable to read squashfs_super_block
EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
raid6: sse2x1   gen() 12129 MB/s
raid6: sse2x1   xor()  6953 MB/s
raid6: sse2x2   gen() 13796 MB/s
raid6: sse2x2   xor()  8955 MB/s
raid6: sse2x4   gen() 15446 MB/s
raid6: sse2x4   xor()  9310 MB/s
raid6: avx2x1   gen() 26819 MB/s
raid6: avx2x1   xor() 18979 MB/s
raid6: avx2x2   gen() 33523 MB/s
raid6: avx2x2   xor() 20856 MB/s
raid6: avx2x4   gen() 34553 MB/s
raid6: avx2x4   xor() 23019 MB/s
raid6: using algorithm avx2x4 gen() 34553 MB/s
raid6: .... xor() 23019 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function   avx       
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device fsid 10774fd4-5beb-474a-abe4-55923f0e513e devid 1 transid 3 /dev/loop0
BTRFS info (device loop0): disk space caching is enabled
BTRFS info (device loop0): has skinny extents
BTRFS info (device loop0): flagging fs with big metadata feature
BTRFS info (device loop0): disk space caching is enabled
BTRFS info (device loop0): has skinny extents
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): recovery complete
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
BTRFS: device fsid 1639c926-af68-466f-bd24-7d493ee80782 devid 1 transid 3 /dev/loop0
BTRFS info (device loop0): disk space caching is enabled
BTRFS info (device loop0): has skinny extents
BTRFS info (device loop0): flagging fs with big metadata feature
perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3149 > 3132), lowering kernel.perf_event_max_sample_rate to 63500
perf: interrupt took too long (3937 > 3936), lowering kernel.perf_event_max_sample_rate to 50750
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
BTRFS: device fsid 961538c4-f9a1-4e98-87b2-dfe0f30f98af devid 1 transid 3 /dev/loop0
BTRFS info (device loop0): disk space caching is enabled
BTRFS info (device loop0): has skinny extents
BTRFS info (device loop0): flagging fs with big metadata feature
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (loop0): Mounting V5 Filesystem
XFS (loop0): Ending clean mount
XFS (loop0): Unmounting Filesystem
XFS (loop0): Mounting V5 Filesystem
XFS (loop0): Ending clean mount
XFS (loop0): Unmounting Filesystem
XFS (loop0): Mounting V5 Filesystem
XFS (loop0): Ending clean mount
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:ModuleExit:115:
KernelInterface: /home/jatin/mainline/unbd/src/linux_interface/ModuleMain.c:ModuleInitialise:109:
KernelInterface: /home/jatin/mainline/unbd/src/linux_interface/ModuleMain.c:Open:49:
KernelInterface: /home/jatin/mainline/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: /home/jatin/mainline/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: vm_pgoff:  1
KernelInterface: vm_start:  7f57df600000
KernelInterface: vm_end:  7f5c165ff000
KernelInterface: length:  436fff000
x86/PAT: ControllerCudaT:30039 map pfn RAM range req write-back for [mem 0x00001000-0x436ffffff], got uncached-minus
blk-mq: reduced tag depth to 10240
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
NBLOCK_MAX_SEGMENTS: 256
x86/PAT: ControllerCudaT:30039 map pfn RAM range req write-back for [mem 0x00000000-0x7fffffffff], got uncached-minus
KernelInterface: /home/jatin/mainline/unbd/src/linux_interface/ModuleMain.c:Release:55:
KernelInterface: /home/jatin/mainline/unbd/src/linux_interface/ModuleMain.c:ModuleExit:115:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:ModuleInitialise:109:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:Open:49:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:IOCTL:66:
KernelInterface: vm_pgoff:  1
KernelInterface: vm_start:  7f39d0f6c000
KernelInterface: vm_end:  7f3e07f6b000
KernelInterface: length:  436fff000
x86/PAT: ControllerCudaT:30504 map pfn RAM range req write-back for [mem 0x00001000-0x436ffffff], got uncached-minus
blk-mq: reduced tag depth to 10240
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
Num CPUS 4    HWCTX numa id: 0
NBLOCK_MAX_SEGMENTS: 256
x86/PAT: ControllerCudaT:30504 map pfn RAM range req write-back for [mem 0x00000000-0x7fffffffff], got uncached-minus
KernelInterface: /home/jatin/GitRepos/Mainline/cudaMemory/unbd/src/linux_interface/ModuleMain.c:Release:55:

Return To OCZ TRION100 System Information